The Three Man Job
The PLC Ramp-Up
The job arrived on a Tuesday morning.
Pete stood in the doorway of the lunchroom, holding his coffee like it might bite him.
"There's a machine down at the dryer building," he said. "Trips an overload every time it starts. I need three electricians and a programmer. Probably two days."
Uncle Lars didn't look up from his toast.
"Which machine?"
"The one with the big drum. The one the operators keep—" Pete stopped. Looked around. Lowered his voice. "The one the operators keep kicking."
Oona put her juice down.
"They kick the machine?"
"Not with their feet," Pete said quickly. "There's a kick start button. On the motor starter. They push it and the motor jumps past the overload and gets going. Then it runs fine. All day."
"So it works," Oona said.
"Works fine," Pete said. "For months now. They don't even call us anymore."
Lars stood up. Put his plate in the sink.
"Let me look at it first."
The dryer building was loud and hot.
The machine was a big motor on a steel frame, turning a drum that dried wood chips on their way to the press. The drum was the size of a small house.
When they walked up, an operator was standing beside the motor starter with his hand already on the button.
"You're gonna kick it again?" Pete asked.
"Gotta," the operator said. "It won't start on its own. Trips the overload every time."
"When did this start?" Lars asked.
The operator shrugged. "Four, five months ago? Right after the last shutdown. The electricians did something to the panel."
Lars walked over to a gray metal cabinet bolted to the wall. He opened it carefully.
Inside, rows of wires ran into a small black device with a screen. Numbers flickered across it. Green text on a black background.
Lars studied it for a long moment.
"What's that?" Oona asked.
"PLC," Lars said. "Programmable logic controller. It tells the motor what to do. How fast to go. When to go. All of it."
He pointed at a number on the screen.
"See this? This is the ramp-up time. It's set to half a second."
Pete looked over his shoulder. "Is that bad?"
"Think about climbing a ladder," Lars said. "If you climb slow, you get to the top fine. If you try to climb the whole ladder by jumping, you're going to fall off."
He turned to the operator.
"The motor starts. It tries to go full speed in half a second. But the motor's heavy — it's turning that whole drum. It can't go from zero to full speed that fast. So it pulls too much electricity, and the overload trips, and the motor shuts down."
The operator blinked. "So the motor's not broken?"
"Motor's fine," Lars said. "The settings are wrong. Someone changed this number and didn't tell anyone."
He pulled a small keyboard out of his bag. Plugged it into the PLC. Pressed a few buttons.
"There," he said. "I set the ramp-up to ten seconds. The motor will take its time. Get up to speed slowly. No overload."
He looked at the operator.
"Try it."
The operator pushed the start button.
The motor hummed. Then it began to turn — slowly. Smoothly. The drum started rolling. The hum got deeper and louder — but steady. No white-hot jerk. No alarm.
The operator stared at it.
"It just... starts."
"That's the idea," Lars said.
Oona waited until they were back in the lunchroom.
"Uncle Lars," she said. "Why didn't anyone write it up? If the machine's been tripping for four months, why didn't the operators call someone?"
Lars poured himself a coffee.
"Because kicking it worked," he said.
"But kicking it isn't fixed," Oona said.
"No," Lars said. "It isn't."
Pete came in. He had a notebook in his hand. He was already crossing things out.
"So we don't need electricians," he said. "And we don't need a programmer."
"Weren't going to need them anyway," Lars said. "Took two minutes to change the setting."
Pete shook his head. "Two minutes. Four months of operators kicking a machine. And it was a setting all along."
"Someone changed the setting during the shutdown," Lars said. "Didn't know what they were doing. Or pressed the wrong button. Either way, nobody caught it."
"But the operators figured out the kick," Pete said. "So nobody looked."
Lars nodded. "The kick works. The machine doesn't."
Oona pulled Uncle Lars's notebook out of her bag. The old one with the worn cover and the spiral binding. She found the next empty page.
She uncapped her pen.
"Okay if I write this one down?" she asked.
Lars nodded. "That's the one you're supposed to write."
Oona wrote carefully. Big letters. One sentence.
"If someone is kicking a machine to start it, the machine isn't fixed. Find why the kick is needed."
She showed it to him.
Lars read it.
Nodded.
"That's the one," he said.
He slid the notebook back into his bag.
"Now let's go see if the drum's up to speed."