← Library

The Three Man Job

The Bearing That Was Warm

The Strathmore Mill was loud. It was always loud.

The stranders made their deep, grinding sound. The conveyors rumbled. The press clanked. The whole building hummed like a giant animal breathing.

But on Tuesday morning, something else was there too.

It was hot.

Pete found Uncle Lars and Oona by the Number Two strander. He was carrying a clipboard and looking worried.

"Lars," Pete said. "We've got a problem."

"What kind of problem?" Lars asked.

"The motor's running hot. Too hot, maybe. The night crew says it's been getting worse for two days."

Oona looked at the big motor. It was as big as a truck. It sat next to the strander, turning a long shaft that made the giant machine chew through logs.

"We're going to need to shut down the line," Pete said. "Probably the whole day. Maybe two days. We might need to pull the motor."

Lars didn't say anything. He just looked.

"Might need to send it to a shop in town," Pete went on. "I'm already working on the paperwork. We'll need a crane, a truck, four or five guys—"

"Let me look at it first," Lars said.

He walked over to the motor. Oona followed.

Lars didn't touch it right away. He just stood there, looking at it. Then he put his hand on the motor housing.

Oona watched.

Lars moved his hand to a different spot. Then another. Then another.

He moved slowly. His hand stayed on the metal for a few seconds each time.

"I don't get it," Oona said. "You're just touching it. How do you know where to touch it?"

Lars didn't answer. He kept moving his hand across the motor housing.

"I'm looking for where it's warm," he said.

"Motors get hot," Pete said. "That's normal. Everybody knows that."

Lars stopped.

His hand was resting right in the middle of the motor housing. He left it there for a long time.

"Here," he said.

Oona came over and put her hand where Lars's hand had been.

"Ow," she said. "That's hot."

"Now feel here," Lars said.

Oona moved her hand to a spot a little to the right.

"Warm," she said. "But not as hot."

"And here?" Lars moved her hand to the other side.

"That's just... warm. Like the rest of the motor."

Lars nodded.

"A motor doesn't get warm evenly," he said. "When it runs, the heat spreads out. But when something's wrong, the heat starts in one place. One spot that's warmer than everything else."

He pointed at the hot spot.

"That's where the trouble is."

Pete came closer. "So what's the trouble?"

Lars looked at the motor. He looked at the shaft running from the motor into the strander. He followed the line of it with his eyes.

"That bearing," he said, pointing to a housing where the shaft came out of the motor.

"The bearing? Bearings get hot too, Lars. That's—"

"This bearing is working too hard," Lars said. "The motor runs normal temperature everywhere else. But this bearing is pushing against something. It's rubbing. It's working harder than it should."

"How long does it have?" Pete asked.

Lars thought about it.

"Couple of weeks. Maybe less."

Pete looked at the motor. Then at Lars. Then at the motor again.

"...book the down day," Pete said.

He wrote something on his clipboard.

"For next week," he said. "Tuesday. One day."

"Half a day," Lars said.

Pete sighed. "Half a day. Fine. I'll schedule—"

"We don't need to pull the motor," Lars said. "We just need to change the bearing. Three people. Four hours."

Pete stared at him.

"You're going to change a bearing on a motor that big with three people?"

"Yes."

"In four hours?"

"Yes."

Pete opened his mouth. Then closed it. Then wrote something else on his clipboard.

"I'll book the crane," he said.

"Already did," Lars said.

Pete looked up.

"I booked it this morning," Lars said. "Before I even came in."

Pete shook his head. "How did you know—"

"They said the motor was running hot," Lars said. "I wanted to be ready."


The next Tuesday, Lars and two other millwrights changed the bearing.

They locked out the power. They pulled the housing cover. And there it was — the bearing was scored and rough. It had been grinding against the shaft for weeks.

"See how the metal is worn?" Lars showed Oona. "That's the bearing working too hard. It was dragging against something it shouldn't touch."

"What was it dragging against?" Oona asked.

Lars turned the bearing in his hand.

"The shaft was just a little bit out of line," he said. "Not much. But enough to make the bearing push sideways instead of spinning straight."

He showed her the shaft. "See that? The line of it is just slightly off. The bearing doesn't like that. It makes it work too hard. And when a bearing works too hard, it gets warm."

Oona looked at the motor. Then at the bearing.

"Warm in the wrong place," she said.

"That's right," Lars said.


That night, Oona sat in the lunchroom with Uncle Lars's notebook.

She wrote carefully, in big letters:

Touch the whole motor. The warm spot is the clue. Find where it starts.

She closed the notebook and handed it to Lars.

He read it. He nodded.

"That's the one," he said.