Fix It or Replace It
The Improvised Tool
Leo helped Uncle Magnus unload the truck at the new site. They were up at the old water plant on the ridge. The air was sharp and clean. Leo loved the smell of pine and metal.
“What are we fixing today?” Leo asked.
Uncle Magnus pointed to a heavy steel beam. “We need to drill four holes in that beam, exactly in line. The new pipe hangers have to be perfect.”
Leo looked at the beam. Then he looked at the drill guide sitting on the tailgate. It was a jig — a heavy steel frame with guides to keep the drill straight. It had clamps and pins.
“Good thing we have the jig,” Leo said.
Uncle Magnus picked it up. He turned it over. He shook his head. “The pins are bent. Someone dropped it. The guides are off by a quarter inch.”
“Can we fix it?” Leo asked.
“Not here,” said Magnus. “It needs a press and a new pin. We’d have to go back to town. That’s a half-day drive each way.”
Leo looked at the beam. He looked at the jig. He looked at the sky. The sun was already past noon.
“So we wait?” Leo said.
Magnus squatted down. He picked up a piece of scrap angle iron from the ground. He turned it over in his hands.
“What does this job actually need right now?” he asked.
Leo thought. “It needs four holes in a line. And the drill has to stay straight.”
“So we need a guide that holds the drill straight and keeps the spacing,” Magnus said. “The proper jig is one way. Is it the only way?”
Leo shook his head. “We could make one.”
Magnus smiled. “That’s the field millwright’s question. Let’s see what we have.”
They walked around the site. There was an old pallet of scrap metal. Magnus found two lengths of angle iron — steel bars bent into an L shape. Strong and straight. He found a handful of bolts and a broken piece of flat bar. On the workbench, there was a small welder.
“We’ll make a drill guide,” Magnus said. “It won’t be pretty. But it doesn’t have to be pretty. It has to hold the drill straight.”
He showed Leo how to lay the two angle irons parallel. He placed the flat bar across them and marked it with chalk. Then he fired up the welder.
Zzzzt. Zzzzt. Sparks flew. Leo watched from a safe distance.
“The proper jig has pins that lock into the beam,” Magnus said. “We’ll use bolts instead. They’ll do the same job.”
He drilled holes in the flat bar. He bolted it to the angle irons. Then he clamped the whole thing onto the steel beam.
“Now we test it,” Magnus said.
He lined up the drill. He pushed the button. Whirrrrr. The bit went through the beam — straight and clean.
“It works!” Leo said.
Magnus checked the measurement. He nodded. “Within a quarter of a millimeter. Good enough for these hangers.”
They drilled the other three holes. Each one was straight. Each one was in line.
Leo wrote in his Fix Log:
Broken: proper drill jig (bent pins)
Needed: four straight holes, today
Used: improvised jig made from angle iron, bolts, scrap flat bar
Temporary: yes
Works: yes
When they finished, Magnus picked up the improvised jig. He looked around the site. He walked over to the workbench and put it down. He took out a marker and a piece of tape.
“What are you doing?” Leo asked.
“Documenting it,” Magnus said. He wrote on the tape:
IMPROVISED JIG — made 6/12. For drill guide on pipe hangers. Holds spacing 200mm. Works within safe limits. Not for use on larger beams. See Leo’s Fix Log.
He stuck the tape on the jig. Then he placed the jig on the shelf next to the other tools.
“Why leave it?” Leo asked.
“Because it’s a good tool now,” Magnus said. “Someone else might need to drill the same holes next week. Now they have a guide. They know what it’s for. They know its limits.”
Leo looked at the jig. It was rough. The welds were not pretty. The bolts were different sizes.
“It’s not the proper one, though,” Leo said.
Magnus put his hand on Leo’s shoulder. “An improvised tool that’s documented and within safe limits is a legitimate tool. It’s not pretending to be the proper jig. It doesn’t have to be. It does what the job actually needs — right here, right now.”
They packed up the truck. The beam was done. The hangers would go on tomorrow.
On the drive home, Leo wrote in his Fix Log:
Lesson: Fit for purpose means: does this do what the job needs? A temporary fix that knows it’s temporary is honest. A temporary fix that pretends to be permanent is a problem waiting to happen.
The improvised jig was honest. It said what it was. It did its job. And it stayed behind to help the next person.
Leo closed his notebook. He watched the pine trees roll past the window.
“I think that was my favorite tool today,” he said. “The one we made.”
Uncle Magnus smiled. “Mine too, Leo. Mine too.”