The Three Man Job
The Number Pete Always Gets Wrong
The Strathmore Mill was loud that morning.
The stranders were running, the press was pressing, and Old Number Four was clanking along like it always did.
Standing in the middle of it all, Pete was looking at a piece of paper and shaking his head.
"Twenty people," Pete said. "At least twenty people. Four days. Maybe five."
Oona looked at Uncle Lars.
Uncle Lars looked at the machine.
"What's the job?" Oona asked.
Pete pointed at the big conveyor belt that carried wood chips up to the second floor. "The belt's worn through. Needs to be replaced. That's a long belt. A heavy belt. You need a crew to pull it, a crew to guide it, a crew to splice it—"
"How many people did you say?" Oona asked.
"Twenty," Pete said. "Four days."
Uncle Lars was still looking at the machine.
"Can I look at it first?" he asked.
"Sure," Pete said. "But I'll start calling people. Twenty people. Four days."
Uncle Lars walked over to the conveyor. Oona walked with him.
The belt was long. It ran from the ground floor, up a steep angle, through a opening in the wall, and into the big room where the chips got sorted.
"How do you replace a belt that big?" Oona asked.
"First," Lars said, "you look at it."
He looked.
He looked at the belt. He looked at the rollers. He looked at how the belt was threaded through the machine.
He looked at the opening in the wall.
He looked at the floor.
Then he said, "Right, that's it."
"What's it?" Oona asked.
"The belt comes off the way it came on," Lars said. "One piece at a time."
"Isn't it one piece?" Oona asked.
"Right now it is," Lars said. "But we're not going to pull the whole thing through. We're going to cut it into sections as it comes off."
"Won't that make more work?" Oona asked.
"No," Lars said. "It makes less."
He pointed at the opening in the wall. "That opening is narrow. If we pull the whole belt through, we need people all along the line to guide it, push it, keep it from snagging. That's where twenty people go."
He pointed at the floor. "If we cut the belt into manageable sections, we only need people at the cut points. Three people. Maybe four."
"But how do you get the new belt on?" Oona asked.
"Same way," Lars said. "In sections. Spliced together as we go."
"Spliced?"
"Joined. Melted and pressed together so it's one piece again."
Oona thought about that. "So the new belt goes on in pieces, and then the pieces become one belt?"
"Yes."
"And it's strong enough?"
"Stronger than the original join," Lars said. "If you do it right."
Pete came back with his phone in his hand. "I've got twelve people confirmed. Working on the rest."
"We only need five," Lars said.
Pete stopped. "Five?"
"Five."
"For a four-day job?"
"Two days," Lars said. "Maybe less."
Pete looked at the conveyor. He looked at Lars. "How?"
"Plan it first," Lars said. "Then do it."
That afternoon, Lars brought his crew.
Five people. Oona counted them.
Lars showed them where the belt would be cut. He showed them where the new belt sections would be staged. He showed them where the splice station would go.
Then they started.
The first cut took ten minutes. The section came off easily. Two people guided it to the floor. One person rolled it up.
"See?" Lars said to Oona. "One piece at a time."
By the end of the first afternoon, the old belt was off.
The new belt sections were lined up in order, waiting.
The next morning, they started splicing.
Oona watched Lars join the sections. He was careful. He measured twice. He checked the temperature of the splice tool. He waited until everything was exactly right before he pressed the pieces together.
"That takes a long time," Oona said.
"Maybe," Lars said. "But if you do it right the first time, you don't have to do it again."
"That's what you always say."
"Because it's always true."
By the end of the second day, the new belt was on.
It was one piece. It ran straight. It sounded smooth.
Pete walked up at exactly four o'clock, just as Lars was tightening the last bolt.
"You're done?"
"We're done."
Pete looked at his watch. "Two days."
"Yep."
"Five people."
"Yep."
"I said twenty people and four days."
Lars nodded. "I know."
"How do you do that?"
Lars stood up and put his wrench in his pocket. "I didn't do anything different. I planned first. Then I brought enough people to do the job, not more."
Oona spoke up. "You know what, Uncle Lars? Pete is always wrong."
"Not always," Lars said. "Just about numbers."
"I'm going to start guessing lower," Pete said. He shook his head and laughed. "Maybe next time I'll say ten people and two days."
"That might be too high too," Oona said.
Pete laughed again. "You're right. I'll say five and a half."
That night, Oona sat at the kitchen table in the millwright shop. She opened Uncle Lars's notebook to a fresh page.
In her careful handwriting, she wrote:
Today we changed a big belt. Pete said we needed twenty people. We used five. Pete said we needed four days. We used two.
More people isn't the same as a good plan. The right plan is the right plan, no matter how many people you have.
Lars says if you know what you're doing, three people is plenty.
I think five is plenty too. But three is probably also plenty.
Pete always guesses twenty. Lars usually needs five. The difference is the plan.
She showed it to Lars.
He read it.
He nodded.
"That's the one," he said.